Skip to main content

Hot Reboot

When you click on the SHUTDOWN button, make sure to simultaneous press SHIFT Button.

If you hold the Shift key down while clicking on SHUTDOWN button, your computer would restart without restarting the Computer. This is equivalent to term "HOT REBOOT".

Labels:

Comments

Post a Comment

Popular posts from this blog

CMOS IC LAYOUT

3 comments
Read more

Download Barrons GRE 17th Edition

Post a Comment
Read more

Know The Beep

One Beep : DRAM refresh failure This may be due to - Bad memory chips - A bad DMA Chip - Bad memory addressing chips on the motherboard Two Beeps : Parity error or Parity Circuit failure -Your memory may not be seated properly on the mother board. -Unplug and plug it properly Three Beeps : Bad memory or bad mother board Four beeps : Timer failure in the RAM. Five Beeps : CPU chip may be dead Six Beeps : Keyboard controller may have failed Seven beeps : CPU is dead. Retry the connections and test. -Replace the whole motherboard. Eight Beeps : Video card is missing or Bad. Nine Beeps : Damaged ROM BIOS. -BIOS chip has to be replaced if it persists. Ten Beeps : CMOS shutdown. -Replace CMOS memory and associated chips. Eleven Beeps : Cache memory test has failed. -To enable cache memory try CTRL+ALT+SHIFT++. One long Beep and Three short Beeps: Memory failure One long Beep and Eight short Beeps : Video card failure. -Try to install video card in another slot. No Beeps : Che
Post a Comment
Read more