projects4ufriends

Y ou may receive the following error message soon after you have updated your Windows XP PC with Service Pack 2: Rthdcpl.exe - Illegal System DLL Relocation The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. This error message is displayed when a recent Windows XP update causes some problems with the Realtek HD Audio Control Panel versions1.41, 1.45, 1.49, and 1.57. Note: You may also encounter this problem if you have ElsterFormular versions 2006 and 2007, TUGZip version 3.4, CD-Tag version 2.27, Suunto Ski Manager versions 1.0.2, 1.1 and 1.2, and BMC PATROL version 7.1 programs on your PC. Cause of the Error This problem usually appears after the security updates 925902 (MS07-017) and 928843 (MS07-008) are installed on a Windows XP Service P...

I nternet connection error 619 may be generated when you attempt to connect to the Internet on a Microsoft Windows XP computer. When the error occurs, the connection may fail and you will not be able to browse the Internet. Cause of the Error There may be several causes of this error. Some the most common ones are given below: * A third-party program, such as Download Accelerator or Zone Alarm that is not releasing the Winsock stack after performing a particular Internet activity. * There is a problem with the access numbers of your Internet Server Provider, such as NetZero. * There is a problem with your modem. * You are unable to connect your DSL modem through a router, such as a LinkSys router. Resolution Methods Most of the time, the error resolves automatically after you restart your computer. If it does not, then depending on the cause, use one of the following methods to fix error 618 problems: Method 1: Uninstall the third-party program You may work...

E rror 718: PPP Timeout occurs when you try to connect your PC over a Dial-Up-Network and the connection fails. The following error message may be displayed on your computer screen when you try to connect to a dial-up network using your modem: Error 718: the computer you're dialing in to cannot establish a Dial-Up Networking connection.Check your password, and then try again. Additionally, you may receive the following error message: Error 718: PPP Timeout A PPP conversation was started, but was terminated because the remote computer did not respond within an appropriate time. This can be caused by poor line quality or by a problem at the server. Note: Point-to-Point Protocol or PPP is a communication protocol used to establish connection between two computers over a serial interface. Usually, PPP is used to connect a personal computer to a server over a phone line with the help of a serial modem. For example, you may use a PPP connection to dial-in and connect to the ...

W hen a DLL file is corrupt or missing you may receive an error message similar to the one given below when you run a program that needs to use this DLL file: Cannot find the file Program_Name.exe. In the error message Program_Name represents the name of the program or name of one of its components in which the error occurred. This error message is usually followed by an error message similar to the one given below: Error starting program. A required .DLL file DLL_Name.DLL was not found. Here, DLL_Name is the name of the DLL file that is causing the error. What Causes Missing DLL File Errors? There can be many causes of missing DLL errors. Some of the most common causes are: * An essential system file required by the program you are using has been deleted. This may happen when a program is uninstalled/installed or you have tried to clean up space on the hard disk. * A virus infection has infected the required DLL file. * DLL entries in the Windows registry are...

I f booting from Last Known Good Configuration does not work, and if a Windows XP repair does not work,here is another option, I have been successful everytime repairing a hung windows XP . If the file system is fat32, you can boot with a Windows 98 boot disk and do the following. If the file system is NTFS, boot with the Windows XP CD to recovery console (you will need to know the administrator password) and do the following. I have been successful in getting windows to boot by just replacing the system file, so you might want to try that first. You may end up having to re-install a few programs after the boot is successful If the copying in the system file does not work, then do these Note:these files, system,software,sam,security & default do not have file extensions to them. from c:\windows md tmp copy C:\windows\system32\config\system C:\windows\tmp\system.bak copy C:\windows\system32\config\software C:\windows\tmp\software.bak copy C:\windows\system32\con...

A n error message similar to the one given below may be displayed on your computer screen when you try to open Windows Media Player on your computer: The file wmp.dll has a version number of 9.0.0.3075 where 9.0.0.2980 was expected. Windows Media Player is not installed properly and must be reinstalled. You may not be able to fix the error even by reinstalling the Media Player and the error message may display when you try to launch the application soon after re-installation. To resolve this issue, open Start menu, select Run, type the following error message, and then press Enter. C:\windows\inf\unregmp2.exe /UpdateWMP Performing this task may fix the confusion regarding Media Player version numbers and resolve the error message. At times, an error message similar to the one given below may appear on your computer screen when you try to play a video file on your Media Player: Explorer has caused a problem in wmp.dll. To resolve this issue, open Start menu, select Run, ...

When the virus has infected the computer so badly that you are not able to run a virus scan, there are still methods to remove the virus. In this post we will share one such useful trick. Fix: The solution to fix such virus is that fix the virus using a boot CD with virus scanner tool. Using a boot CD, the computer will boot using the CD, thus the virus will not load into the memory and will not be able to kill the anti-virus. Steps to use the Kaspersky Rescue Boot CD: 1. Download the Boot CD image called Kaspersky Rescue CD on some other computer which is not infected. Link is given at the bottom of this article. 2. Burn a CD using this CD image on the computer where you download the image file. You can use Nero or In Built Image burning tool of Windows 7 or any other image burning tool for this. Now use this CD to boot the infected computer. 3. Boot the infected computer using this CD. If the computer does not boot with this CD, press delete when computer starts, open B...